1. Remote Desktop Windows 7 To Windows 10
2. Remote Desktop From Windows 7 To Windows 10

To enable remote desktop connection in Windows 10, you need to make few changes to settings. This is in-built in the OS itself.

You need not install any paid third-party software. The RDP (remote desktop protocol) software comes in-built in Windows 10 or 8.1 or 7. It’s free to use, once you buy a genuine license of Pro or Enterprise edition.

Download this app from Microsoft Store for Windows 10, Windows 8.1, Windows 10 Mobile, Windows Phone 8.1, Windows 10 Team (Surface Hub), HoloLens. See screenshots, read the latest customer reviews, and compare ratings for Microsoft Remote Desktop. How to Enable Remote Desktop Remotely on Windows 10. The easiest way to enable Remote Desktop on the Windows operating system family is to use a Graphical User Interface (GUI). To do this, you need to; Open the “ System” control panel, go to “ Remote Setting” and enable the “ Allow remote connection to this computer” option in the.

You need to give permission to the remote person or support guy to access your computer. By just turning on the switch “Enable Remote Desktop“, you can make your desktop accessible to remote user.

Related

This is little different with Control Panel in Windows 7. To use RDP, you should be connected to a network like LAN, WLAN, Wired Network, Wireless, Office Network etc.

Once you activate the remote desktop, you need to make few changes to remote settings in Windows 10/8.1/7.

How to Connect a Remote PC over the Internet?

In the earlier post, we have seen on how to use RDP over a local network .

But, suppose you are working in an office and want to connect to a home PC, you would probably use the Internet or WAN connection for remote access.

First make sure, Remote Desktop is not being blocked on the remote computer.

• Next you need to configure your router, so that it knows the correct addresses of your computers.
• For this you need the default gateway and WAN settings.
• You can get them using the “ipconfig” tool or using properties of network connection or using any web service on the Internet.
• Then you need to enable Port Forwarding using the Port 3389.
• As each router has its own settings, you may need to take the help of the corresponding router manual to do it.

Note:

It is important to recognize that, if you are using Internet to connect to your remote PC on a regular basis, the external (WAN) IP address is likely to change from time to time.

Remote Desktop Windows 7 To Windows 10

To avoid the hassle of rediscovering the address every time, subscribe to a dynamic DNS service.

Many routers have an option for dynamic DNS. So look in your router manual and select one of the services supported by your router.

Related –

This YouTube video shows how to connect to remote PC using WAN or router settings. In this specific example, TP-LINK router is used for setting the options for remote desktop connection.

After completing the above steps, the connection to your remote client is the same as above.

You just have to open the “Remote Desktop Connection” and enter the external IP (WAN) of the client you want to connect. Then enter the credentials and you will have full access to the client PC.

Suggested Reading –

Remote Desktop From Windows 7 To Windows 10

How to Use Remote Desktop for Windows 10 or 8.1 and 8?

Remote Desktop Protocol (RDP) is a good old feature since the XP days. It can be useful to connect from one system to another PC to FTP files or resolve any PC issues.

There are other several desktop programs which can set up with a remote connection.

Some of these utilities are like join.me, TeamViewer and Chrome Remote Desktop. They are especially useful when inter-connecting different platforms like Windows and Android, Windows and Linux etc.

But if you want to connect two Windows PCs, then the built-in RDP service in Windows 10 is just enough.

This YouTube video shows, how to enable remote desktop access in Windows 10. It also shows the way to connect remote PC using remote desktop connection. In this tutorial video, you can also find on how to connect, when the remote PC is on a LAN or WAN using port forwarding.

How to Use Remote Desktop in Windows 7 and Vista?

There may be slight variations when you try to use remote desktop feature in Windows 7 or Vista. The following videos will show you, how to connect to a remote host (which may be a Vista or 7) from a remote client ( may be a Windows 10 or 8 machine).

This YouTube video will follow the process of setting up remote desktop connection in a remote session on a Windows 7 computer. You can then use the RDC to connect from a remote client to gain access to it. The settings are similar, but you may have small variations.

This YouTube video talks about how to enable and connect remote host using RDP in Vista. You may be required to do more settings when compared to Windows 10 or 7.

If you are trying to connect to a computer remotely, but an error message is appearing continuously, you might not be able to connect to that remote computer. Although this error message should not appear, Windows shows such a warning when the required authentication doesn’t meet. When you are trying to connect to a computer remotely, your host computer must have the correct permission or that remote PC should have the correct settings. Otherwise, you will end up getting such a problem all day long. Sometime, you might get “The remote computer requires Network Level Authentication (NLA)” error message after restoring the PC using a system restore point.

The exact error message looks like this-

The remote computer requires Network Level Authentication, which your computer does not support. For assistance, contact your system administrator or technical support.

However, many people have got another error message, which is caused by the same thing. The other error message is-

The remote computer that you are trying to connect to requires network level authentication (NLA), but your windows domain controller cannot be contacted to perform NLA. If you are an administrator on the remote computer, you can disable NLA by using the options on the remote tab of the System Properties dialog box.

No matter what remote desktop tool you are using, you will keep getting a similar error message until or unless you make the mandatory changes.

To fix The remote computer requires Network Level Authentication issue on Windows 10/8/7, follow these following solutions-

1. Tweak Remote Desktop security settings
2. Disable NLA using Group Policy Editor
3. Disable Network Level Authentication using Registry Editor
4. Turn off NLA using PowerShell

In a nutshell, you need to disable the Network Level Authentication or loosen up the settings so that the remote computer can connect to the host machine without any error.

Solution #1: Tweak Remote Desktop security settings

By default, your Windows machine allows connections only from computers that have Network Level Authentication. This inbuilt security function lets you block all the unwanted connections when you have a large local area network, and your computer is open for share. You can change the network location from public to private and vice versa as per your requirement. However, the same settings can cause the issue as mentioned earlier. Therefore, you can try to disable this option and check if the problem remains or not. Following the following steps to allow connections without NLA.

• Open This PC on your computer.
• Right-click on empty space and select Properties.
• On your right-hand side, you should find an option called Advanced system settings. You need to click on this option.
• Switch from Advanced tab to Remote
• Alternatively, you can press Win + R, type sysdm.cpl and hit the Enter button.
• Make sure Allow remote connections to this computer option is selected. If not do choose this option and remove the tick from the checkbox called Allow connections only from computers running Remote Desktop with Network Level Authentication.
  
• Click the Apply and OK buttons to save your change.

After that, try to connect to the remote computer.

Solution #2: Disable NLA using Group Policy Editor

You can disable the Network Level Authentication with the help of Group Policy Editor. This is much more user-friendly, and you do not need any expert knowledge to get it done. The only drawback is you cannot get Local Group Policy Editor on Windows 10 Home version. Even if you sideload Group Policy Editor, you might not get the similar option in that third-party app. Therefore, this method is applicable to Windows 10 Pro and Enterprise users only.

• Open Local Group Policy Editor. You can search for it in the Taskbar search box. Or you can enter gpedit.msc in the Run prompt.
• After opening it, navigate to this path-
• On your right-hand side, you should find a setting named Require user authentication for remote connections by using Network Level Authentication. Double-click on this setting to open the Properties.
  
• Make sure the Disabled is selected. If not, do choose that option and click the OK button to save your change.

Solution #3: Disable Network Level Authentication using Registry Editor

Network Level Authentication can be blocked via Registry Editor as well. However, you need to do that on the remote computer. This is quite easy when your host computer is connected to the remote computer via Local Area Network. In any case, if your Windows registry editor is disabled accidentally or by the syatem administartor, first enable the Windows registry editor. The advantage of this method is you can get Registry Editor on any version of Windows 10/8/7.

• Open Registry Editor. You can either search for it in the Taskbar search box, or you can enter regedit in the Run prompt.
• Go to File > Connect Network Registry.
• Enter the name of the remote computer and click the Check Names You should find the remote computer’s Registry Editor on your host computer.
• After opening Registry Editor of the remote computer, navigate to this path-
• Here you can find two keys i.e. SecurityLayer and UserAuthentication. Open one after one and set the value to zero(0).
  
• After that, open PowerShell and enter this command-

After that, if you can connect to the remote computer via Remote Desktop.

Solution #4: Turn off NLA using PowerShell

To turn off or disable Network Level Authentication with the help of Windows PowerShell, you need the remote computer name. Otherwise, this is not possible to get started with this method. If you have collected that, go ahead and follow these steps.

• Open Windows PowerShell with administrator privilege. For that, search for ‘powershell’ in the Cortana search box > right-click on the corresponding result > select Run as administrator.
• Enter the following commands one after one-

  Do not forget to replace the remote-computer-name with the actual name.

• Restart computer.

Here is a list of powershell commands to uninstall and reinstall built-in Windows system core apps of your choice.

Final Word

To fix The remote computer requires Network Level Authentication error in Windows 10/8/7, you must have to disable or turn off Network Level Authentication (NLA). Otherwise, this is not possible to connect to the remote computer even if both machines are in the same Local Area Network. You can try any aforementioned method to disable NLA. However, if you do not know what you are doing and you want to go through some simple steps, I would recommend you to use the first or second method.

Also useful:How to get WIndows XP HyperTerminal for Windows 10/8.1/7.